Sludge dewatering network installation steps and precautions for use

Your current location: Home >> NEWS

Sludge dewatering network installation steps and precautions for use

Release date:2018/12/20 9:51:01 Click:170

  Sludge dewatering network installation steps and precautions for use

  The sludge dewatering net interface is made of 316L stainless steel buckle. The glue that covers the steel buckle is made of German imported resin glue. The glue is mainly used to protect the steel buckle from falling off and avoid damage to the scraper.
  Sludge dewatering network installation steps:
  1. First transfer the interface of the old mesh belt on the filter press device to the position where the interface can be easily removed.
  2. Loosen the old mesh belt and pull out the wire connected to the interface.
  3. Connect the new network belt to the old network belt.
  4. Start the machine, pull out the old mesh belt, and bring the new mesh belt into the device.
  5. When the old mesh belt is pulled out of the equipment, the old mesh belt will be removed from the new network belt.
  6. The two steel buckles of the new mesh belt are crossed and joined together, and the stainless steel wire is worn and tensioned.

Tel: +86 18553816279

Address: Daimiao Office,TaiShan District,Tai'an City,Shandong Province,China

E-mail: admin@tasxysm.comWebsite: www.tasxysm.comPost Code:271000

Copyright: Taian ShengXiYuan Trading Co., Ltd.

Technical support: NuoDun Network